Trajectory profile data from glider ru34, including pH, Total Alkalinity, and Aragonite Saturation State, deployed by Rutgers, the State University of New Jersey in the Mid-Atlantic Bight from 2023-09-20 to 2023-10-19 (NCEI Accession 0306334)

This dataset contains the trajectory profile data from glider ru34 from one seasonal deployment (2023-09-20 to 2023-10-19). This deployment (glider trajectory ru34-20230920T1506) was part of a project to conduct a 2-year baseline survey with a pair of gliders deployed in each season, and a 3rd glider deployed three times per year to fill coverage gaps in the seasonal glider deployments from the onset of seasonal stratification associated with the Cold Pool formation in the Mid-Atlantic Bight in the spring to the physical breakdown in the fall. This glider deployment is the second of three gap-fill missions this year. This glider was equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa Optode for measuring dissolved oxygen (sensor failed on 2023-10-07), and an Rx-LIVE fish telemetry receiver to track tagged species moving through the region. This deployment out of Sandy Hook, New Jersey ran a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, and ended near Tuckerton, New Jersey. This delayed mode, high-resolution dataset contains CTD and chlorophyll a measurements, as well as pH, total alkalinity, and aragonite saturation state. Salinity, density, pH, TA, and aragonite saturation state have been calculated from raw variables. Acoustically-derived data are processed separately and not included in this package. QA/QC measures have been run according to the IOOS Manual for Real-Time Quality Control of pH Observations and IOOS Manual of Glider Data. Suspect/failed IOOS QC values, and values flagged by a CTD hysteresis test have been removed from this dataset. pH and dissolved oxygen (when applicable) have been adjusted for sensor lag by applying optimal time shifts calculated by glider segment in order to minimize separation between glider down and upcasts as described in Saba et al 2019 https://doi.org/10.3389/fmars.2019.00664 and Wright-Fairbanks et al 2020 https://doi.org/10.1029/2020JC016505. QC code can be found at: https://github.com/rucool/rugliderqc. Post-processing code can be found at: https://github.com/rucool/dataset_archiving/tree/master/pH_glider. Discrete carbonate chemistry water sampling data collected at glider deployments and recoveries to ground-truth the glider-based pH sensor can be found at https://rucool-sampling.marine.rutgers.edu/erddap/tabledap/pH_glider_carb_chem_water_sampling.html and the groundtruthing comparison tables can be found at https://rucool-sampling.marine.rutgers.edu/erddap/tabledap/rmi_pH_glider_groundtruthing.html. The original glider dataset which contains additional variables can be accessed at https://slocum-data.marine.rutgers.edu/erddap/index.html. Contributors: Grace Saba, Josh Kohut, Nicole Waite, David Aragon, Brian Buckingham, Kaycee Coleman, Chip Haldeman, John Kerfoot, Laura Nazzaro, Lori Garzio.