TEAMER: Biofouling Analysis for Wave Energy Piston Design - Load Cell Data

Description

Biofouling and corrosion are a major concern for all ocean-deployed components, especially when mechanical motion is involved. Triton has developed the concept of a biofouling mitigation seal as part of the piston sealing assembly for the Triton Wave Energy Converter (TSI-WEC). This mitigation seal has the purpose of preventing the formation of a biofilm on the inside of the piston cylinder. It is hypothesized that the prevention of a biofilm will reduce the amount of macro-biofouling that can occur in the piston assembly. The mitigation seal can also reduce the wear on the main dynamic seal, helping to maintain smooth operation and water-tightness. The cylinder is made from a thermoset composite epoxy, which is resistant to corrosion. However, no studies have researched the material's performance with biofouling. Triton placed two prototype Power Take-Off (PTO) assemblies in a PNNL biofouling tank, one with a biofouling mitigation seal and one without, allowing for an evaluation of seal effectiveness at the prevention of biofouling. In actual WEC operation, wave action would react against the piston, which would drive the linear actuator and electric generator, providing electrical power. In the test setup, this was reversed; a linear actuator was powered to drive the piston in a consistent motion within the cylinder. There are two assemblies: one has a biofouling mitigation seal, the other (control) does not. The following data encompasses a 4 month test period, with load cells being used to monitor piston friction force. Results from this testing will be used to improve seal design and material selection, mitigating risk of premature failure during open water testing and evaluation. This project is part of the TEAMER RFTS 3 (request for technical support) program.

Resources

Name Format Description Link
57 This archive contains raw load cell data for month 2. https://mhkdr.openei.org/files/534/Month%202.zip
57 This archive contains raw load cell data for month 4. https://mhkdr.openei.org/files/534/Month%204.zip
57 This archive contains raw load cell data for month 3. https://mhkdr.openei.org/files/534/Month%203.zip
75 This matlab script is used to process the test campaign data. https://mhkdr.openei.org/files/534/TEAMER_Triton_Core_Processed_SI-001.mat
33 Brief presentation summarizing work with biofouling analysis on TSI-WEC https://mhkdr.openei.org/files/534/OREC%20Triton%20v4.pdf
75 This matlab script is used to process the baseline test data. https://mhkdr.openei.org/files/534/TEAMER_Triton_Baseline_Processed_SI.mat
33 TEAMER Post-Access Test Report for Biofouling Analysis on Wave Energy Piston Design https://mhkdr.openei.org/files/534/Triton_PNNL_TEAMER_Post_Access_Report_Public_TR.pdf
57 This archive contains raw load cell data for month 1. https://mhkdr.openei.org/files/534/Month%201.zip
57 This zip file contains load cell data from baseline testing in filtered seawater. https://mhkdr.openei.org/files/534/Baseline.zip

Tags

  • wave-energy
  • rfts-3
  • processed-data
  • hydrokinetic
  • mhk
  • matlab
  • oscillating-water-column
  • wec
  • marine
  • power
  • code
  • biofouling
  • technology
  • raw-data
  • wave-energy-converter
  • energy

Topics

Categories