POLIS_MSCA-IF-661429_DATASETS

Description

Plan name D1.2_POLIS_MSCA-IF-661429_DMP ID D1.2 Grant number 661429 - POLIS - H2020-MSCA-IF-2014 Project number 661429 Project acronym POLIS Project title Studying the bricks of microbial cities: characterization and structural properties of exopolysaccharides and their interaction with proteins and cations in anammox granular sludge Call (part) identifier H2020-MSCA-IF-2014 Topic MSCA-IF-2014-EF Marie Skłodowska-Curie Individual Fellowships (IF-EF) Fixed EC Keywords Environmental biotechnology, bioremediation, biodegradation Free keywords anammox, granular sludge, biofilm, exopolymeric substances, exopolysaccharides, EPS, rheology, exopolymeric proteins, mono-divalent cations Beneficiary Polytechnic University of Milan (PIC: 999879881) Department Department of Civil and Environmental Engineering (DICA) Supervisor Prof. Francesca Malpei Principal Investigator/Researcher Ing. Tommaso Lotti, PhD Principal Investigator/Researcher ID http://orcid.org/0000-0003-0379-4822 Plan data contact tommaso.lotti@polimi.it; francesca.malpei@polimi.it Project description This research project is in the context of environmental engineering, in particular in the field of wastewater treatment, more specifically focused on biofilm-based innovative technologies for nitrogen removal. The anaerobic ammonium oxidation (anammox) bacteria are recently discovered players of the biogeochemical nitrogen cycle. The bioprocess based on anammox metabolism is an innovative technology for the removal of nitrogen from municipal and industrial wastewaters allowing important savings on operational costs due to the requirement of 60% less oxygen (aeration), no need for organic carbon and the production of 90% less excess sludge, compared with conventional nitrogen removal technologies. Its potential application to municipal wastewater (sewage) would allow a complete redesign of the present energy-consuming into an energy-yielding sewage treatment plant. Due to the slow growth rate of anammox bacteria, their retention in the system is one of the main concern for process stability. This is the reason why in most of the different anammox-based technologies currently applied, anammox bacteria are cultivated in the form of biofilm and in particular in the form of self-aggregating biofilm (i.e. granular sludge). Biofilm stability is closely related to the properties of the extracellular polymeric substances (EPS) constituting the matrix in which microorganisms live and grow. EPS are high-molecular weight compounds secreted by microorganisms establishing the functional and structural integrity of biofilms, and are considered the fundamental component that determines the physiochemical properties of a biofilm. EPS are mostly composed of polysaccharides and proteins, but also include other macro-molecules such as DNA, lipids and humic substances. The aim of the present research was to investigate the structural components of anammox EPS matrix unrevealing the mechanisms involved in anammox biofilm (specifically granular sludge) formation and stability. Several extraction methods were tested to evaluate the extraction yield and the total carbohydrates/protein content. Mass spectrometry (e.g. MALDI MS) was used to investigate functional EPS and their fine structures, with special focus on hydrogel and film forming components. Rheometric analysis were used to evaluate the viscoelastic characteristics of anammox granular sludge in comparison with the hydrogel (potentially) formed by extracted EPS and their interaction with mono/divalent-cations. Microscopy techniques (mainly AFM, SEM) were used to image the morphology of the extracted biopolymer and the film structure. Considering that excess sludge is currently one of the main waste products of wastewater treatment facilities, the recovery of a bio-based polymer and its application in other industrial sectors would contribute to the transition towards a circular economy fostering sustainable economic growth. The results of the present research could identify the potential applications of a bio-based polymer recovered from excess biofilm sludge based on its properties. Open access to scientific publications and underlying data Scientific peer-reviewed publications such as journal articles will be deposited upon publication in Zenodo repository (https://zenodo.org/), an OpenAIRE/CERN repository. The deposition of the research data needed to validate the results presented in the deposited scientific publications ('underlying data') will be evaluated from time to time by the Researcher (Ing.Tommaso Lotti, PhD) and the Supervisor (Prof.Francesca Malpei) along the project development according to the approach of the European Commission “as open as possible, as closed as necessary”. The research data decided to be open up will be organized in separate data sets. For the description of each data set and the relative depositing procedure, the reader is referred to the “DATA SETS” section below. The list of openly shared data sets will be updated and/or modified whether necessary during the time course of the project.     DATA SETS Data set name POLIS_MSCA-IF-661429_DATASET-1 Data set description Different protocols used to extract structural EPS from anammox sludge. EPSs were extracted from freeze-dried anammox granules (originating from the full-scale anammox reactor of the wastewater treatment plant of Rotterdam, Sluisjesdijk-Dokhaven) by the following methods: ultrasonication, heating with Na2CO3, cations exchange resin, ethylenediaminetetraacetic acid (EDTA), NaOH, formamide with NaOH, formaldehyde with NaOH, sulfuric acid. The extraction efficiency of each protocol was evaluated by the following parameters: - Extraction yield evaluated by gravimetric analysis - Carbohydrates and protein equivalent content of the EPS resulting from different extraction protocols Tests were conducted in triplicates. Dataset will be presented in the form of tables and saved in pdf format with the name “POLIS_MSCA-IF-661429_DATASET-1.pdf”. Standards and metadata Extraction protocols were derived from biofilm literature and in particular from biofilm systems applied in the field of wastewater treatment. Gravimetric analysis according to American Public Health Association (APHA), Standard Methods for the Examination of water and Wastewater (2005). Data are expressed as milligrams of extracted-EPS dry weight per gram of volatile suspended solids (VSS) of the original biofilm (mg-EPS/g-VSS). Total carbohydrate content was determined by a phenol-sulphuric acid assay with D-glucose used as standard (Dubois et al., 1956). Data are expressed as milligram of total carbohydrates as D-glucose equivalent per gram of extracted-EPS dry weight (mg/g-EPS). Protein content was measured by the biconchoninic acid (BCA) protein assay with bovine serum albumin (BSA) used as standard (Interchim Uptima BC assay quantitation kit). Data are expressed as milligram of total proteins as BSA equivalent per gram of extracted-EPS dry weight (mg/g-EPS). To the best of author knowledge Metadata standards are missing in this particular field. Therefore, our results were reported using acronym and units of measurements according to the most renowned journals in the field (e.g. Water Research, Environmental Science and Technology, Bioresource Technology, etc.). In order to facilitate data sharing and use, metadata describing the nomenclature used for the storage of research data is given in a separate text file named "DATASET-1_metadata" in .pdf format. The file " DATASET-1_metadata" contains the list of acronyms and symbols used for data presentation as well as the description of the materials and methods used during the experimental phase. Data sharing A selection of research data will be deposited, upon publication of the scientific publication reporting the elaborated research data, in Zenodo repository (https://zenodo.org/), an OpenAIRE/CERN repository. Zenodo provides to each data set a persistent identifier (DOI). Peer-reviewed scientific publications will be deposited in self archiving/green "OA" repositories such as Tommaso Lotti's page on ResearchGate (https://www.researchgate.net/profile/Tommaso_Lotti) and Polytechnic University of Milan institutional self-archiving system (https://re.public.polimi.it/). Research data as well as scientific publications and conference papers are available upon request via e-mail.   Data set name POLIS_MSCA-IF-661429_DATASET-2 Data set description Matrix-assisted laser desorption/ionization (MALDI) is a soft ionization technique used in mass spectrometry, allowing the analysis of biomolecules such as biopolymers. MALDI methodology is a three-step process. First, the sample is solubilized in a solvent, mixed with a suitable matrix material and applied to a metal plate. Second, a pulsed laser irradiates the sample, triggering ablation and desorption of the sample and matrix material. Finally, the analyte molecules are ionized by being protonated or deprotonated in the hot plume of ablated gases, and can then be accelerated into the mass spectrometer. The present dataset comprises the mass spectra of the extracellular polymeric substances (EPS) samples extracted from anammox granular sludge. EPS were extracted from freeze-dried anammox granules originating from the full-scale anammox reactor of the wastewater treatment plant of Rotterdam, Sluisjesdijk-Dokhaven (van der Star et al., 2007). EPS was dissolved in ammonium bicarbonate (5 mM) and run in a conventional SDS-PAGE gel and stained with Coomassie Blue. Stained gel bands were cut and trypsin digestion was performed following the Protease-Max digestion protocol (Promega). α-Cyano-4-hydroxycinnamic acid (HCCA) was used as matrix and dissolved to a final concentration of 10 mg/mL in a solution of pure acetonitrile and 0.1% trifluoroacetic acid (70/30% v/v). The digested EPS solution was mixed with the matrix (50/50% v/v), spotted on the target plate and then analyzed by means of a MALDI TOF/TOF Ultraflex III (Bruker). After complete drying, the samples were submitted to mass spectrometry analysis on a MALDI TOF TOF Ultraflex III (Bruker Daltonics, Germany), which was operated in positive reflectron for peptide analyses. The peptidic fraction of the venom was acquired in the range m/z 900-4500. Standards and metadata Metadata describing the nomenclature used for the storage of research data are given in a separate text file named "DATASET-2_metadata". The file "DATASET-2_metadata" contains the list of acronyms and symbols used for data presentation as well as the matrix and solvent used for sample preparation. The mass spectrometer output files is presented in the standard format “mzML” (Mass Spectrometry Markup Language) in order to facilitate data sharing and reuse and saved in a compressed folder named "POLIS_MSCA-IF-661429_DATASET-2". The format “mzML” is a unified open file format containing the peaks list and information about the precursor MS signals and about the associated metadata (i.e., instrument settings and description, acquisition mode, etc). Data sharing A selection of research data are deposited, upon publication of the scientific publication reporting the elaborated research data, in Zenodo repository (https://zenodo.org/), an OpenAIRE/CERN repository. Peer-reviewed scientific publications will be deposited in self archiving/green "OA" repositories such as Tommaso Lotti's page on ResearchGate (https://www.researchgate.net/profile/Tommaso_Lotti) and Polytechnic University of Milan institutional self-archiving system (https://re.public.polimi.it/). Research data as well as scientific publications and conference papers are available upon request via e-mail.  

Resources

Name Format Description Link
0 http://data.europa.eu/88u/dataset/oai-zenodo-org-1158336
0 http://data.europa.eu/88u/dataset/oai-zenodo-org-1158336
0 http://data.europa.eu/88u/dataset/oai-zenodo-org-1158336
0 http://data.europa.eu/88u/dataset/oai-zenodo-org-1158336
0 http://data.europa.eu/88u/dataset/oai-zenodo-org-1158336

Tags

  • eps;-extracellular-polymeric-substances;-biofilm;-resource-recovery;-wastewater-treatment;-anammox;-granular-sludge;-proteomics;-maldi;-proteins,-polysaccharides

Topics

Categories