Description

Two active landslides at and near the retreating front of Barry Glacier at the head of Barry Arm Fjord in southern Alaska could generate tsunamis if they failed rapidly and entered the water of the fjord. Landslide A, at the front of the glacier, is the largest, with a total volume estimated at 455 M m3. Historical photographs from Barry Arm indicate that Landslide A initiated in the mid twentieth century, but there was a large pulse of movement between 2010 and 2017 when Barry Glacier thinned and retreated from about 1/2 of the toe of Landslide A. Interferometric synthetic aperture radar (InSAR) investigations of the area between May and November, 2020, revealed a second, smaller landslide (referred to as Landslide B) on the south-facing slope about 2 km up the glacier from Landslide A. Landslide-generated tsunami modeling in 2020 used a worst-case scenario where the entire mass of Landslide A (about 455 M m3) would rapidly enter the water. The use of multiple landslide volume scenarios in future tsunami modeling efforts would be beneficial in evaluating tsunami risk to communities in the Prince William Sound region. Herein, we present a map of landslide structures and kinematic elements within, and adjacent to, Landslides A and B. This map could form at least a partial basis for discriminating multiple volume scenarios (for example, a separate scenario for each kinematic element). We mapped landslide structures and kinematic elements at scale of 1:1000 using high-resolution lidar data acquired by the Alaska Division of Geological and Geophysical Surveys (DGGS) on June 26, 2020 and high resolution bathymetric data acquired by the National Oceanic and Atmospheric Administration (NOAA) in August, 2020. The predominate structures in both landslides are uphill- and downhill-facing normal fault scarps. Uphill-facing scarps dominate in areas where downslope extension from sliding has been relatively low. Downhill-facing scarps dominate in areas where downlslope extension from sliding has been relatively high. Strike-slip and oblique-slip faults form the boundaries of major kinematic elements. Four major kinematic elements, herein named the Kite, the Prow, the Core, and the Tail, are within, or adjacent to Landslide A. One major kinematic element, herein named the Wedge, forms Landslide B. Kinematic element boundaries are a result of cumulative, differential patterns and amounts of movement that began at inception of the landslides. Elements and/or their boundaries may change location as the landslides continue to evolve. Kinematic elements mapped in 2020 may or may not reflect patterns of historical short-term, episodic movement, or patterns of movement in the future. We were not able to field check our mapping in 2020 because of travel restrictions due to the COVID-19 pandemic. We hope to field check the mapping in the summer of 2021. In this data release, we include GIS files for the structural and kinematic map; metadata files for mapped structural features; and portable document files (PDFs) of a location map, and the structural and kinematic map at a scale of 1:5000. Lidar and bathymetric data used to map landslide structures will be released by DGGS and NOAA in 2021.

Resources

Name	Format	Description	Link
	55	Landing page for access to the data	https://doi.org/10.5066/P9EUCGJQ
	55	The metadata original format	https://data.usgs.gov/datacatalog/metadata/USGS.5fff561ed34e592d8671ee85.xml

Map of landslide structures and kinematic elements at Barry Arm, Alaska in the summer of 2020

Description

Resources

Tags

Topics

Categories