Energy usage in municipal buildings

The data sets in this directory are coordinated based on wedge data from the municipalities.

There are four types of data that belong together.
— Location: Describes a location (usually a building) for which there is energy data.
— MeasurementPoint:Describes a measuring point with a unique id, what the measuring point is and the unit in which it is measured.
— LocationMeasurementPoint: Connects a measuring point to a location and gives a local name for the measuring point. Some measuring points are used by many locations, e.g. temperature meters from official measurement stations from the Meteorological Institute (met.no)
— Measurements: Time stamped measurements from measurement point

Description of each of the datasets with their fields follows below.

Location

| Field Name | Description |
| | | | | | | | |
| location | Name of the location, e.g. name of school or kindergarten |
| municipality_code | Municipal code for the location. The codes are defined in the data set Standard for municipal division at Statistics Norway. I'M SORRY.
| location_type | Type of location. Legal values: Building, Rooms, Other |
| building_type | Type of building. Legal values: School, Kindergarten, Health buildings, Administrative buildings, Sports buildings, Church buildings, Emergency response buildings, Urban and leisure buildings, cultural buildings, Varmesentral, Other building |
| address | Address to the location/building |
| latitude | Latitude of the location in decimal degrees |
| longitude | Length of location in decimal degrees |

MeasurementPoint

| Field Name | Description |
| | | | | | | | |
| meter_id | Unique id for the measuring point. Examples: EID_972418013_00290, Eclimate_82290_TAM |
| meter_type | Describes what type of measuring point it is. Examples are fixed power, Temperature, degree days, Heat pump |
| unit | Unit measuring device, e.g. kWh, °C |
| meter_level | Usually one of the following two values: Consumable meter, Other meter |

LocationMeasurementPoint

| Field Name | Description |
| | | | | | | | |
| location | Location name (see Location) |
| municipality_code | Municipal code for the location |
| meter_id | Unique id for the measurement point (see MeasurementPoint) |
| meter_name | Local name for the measuring point (uniquely only within the location). Examples: Temp agent, fixed force, fixed force 67756 |

Measurements

| Field Name | Description |
| | | | | | | | |
| timestamp | Time stamp with date and time, e.g. 2010-01-04 06:00:00 |
| meter_id | Unique id for measurement point (see MeasurementPoint) |
| value | Measurement reading. Usually moving numbers with commas as separator, e.g. 4.20 |