Thermal conductivity - WLF: Thermal conductivity water-saturated
Description
This application is intended to provide the builders, planners and drilling companies with geological, hydrogeological and geothermal data for the design and construction of geothermal probes. The following maps can only serve as an orientation, since the respective underlying drill grid does not allow reliable surface statements due to the complex geological storage conditions in large areas. The design of the required drilling depths must therefore always be based on the sequence of layers encountered during drilling. The information for the loose rocks comes from VDI 4640. For the solid rocks, the values were determined in the State Office for Geology and Mining.:The stratum inventories of over 1500 nationwide and at least 100 m deep drillings were evaluated. The layers were assigned thermal conductivity for the dry and water-saturated state. For the loose rocks, these correspond to VDI 4640 sheet 1. The thermal conductivity of the solid rocks are average values based on investigations carried out by the State Office for Geology and Mining. These values were used for the depth intervals 40, 60, 80 and 100 m.
Resources
| Name |
Format |
Description |
Link |
|
0 |
|
https://www.geoportal.rlp.de/mapbender/php/wms.php?inspire=1&layer_id=28377&withChilds=1&REQUEST=GetCapabilities&SERVICE=WMS |