Flood hazard map Trier — Level 10.00 m (HQ10) — Flood hazard map Trier — Level 10.00 m, Pressurised water
Description
Flooding areas in the Trier urban area in case of floods at specified levels — extract from the local flood protection concept Trier, development of flooding areas in 10 cm steps — Map series of water levels 9.10 m to 12.70 m at the Trier level. The flood areas shown are based on the intersection of the calculated maximum water levels with a digital terrain model. Status: 5/2021: Pressurised water areas in the Trier urban area in case of floods — Extract from the local flood protection concept Trier, development of flooding areas in 10 cm steps — Map series of water levels 9.00 m to 12.70 m at the Trier level — (as of: 5/2021). Note: The pressure water surfaces represent what the extent of flooding would be if the water level in the Moselle were to extend horizontally to the foreland. These areas are not directly connected to the Moselle and can be flooded independently of the surface run-off via the sewer network or groundwater.
Resources
| Name |
Format |
Description |
Link |
|
0 |
|
https://www.geoportal.rlp.de/mapbender/php/wms.php?inspire=1&layer_id=69469&withChilds=1&REQUEST=GetCapabilities&SERVICE=WMS |
Tags
- pegel
- überflutung
- überflutungsflächen
- hochwassergefahrenkarte
- hochwasserschutzkonzept
- infomapaccessservice
- inspireidentifiziert
- hochwasser
- druckwasser
- trier